Excelencia en Éter de Celulosa — Confiado por más de 1000 empresas a nivel mundial Obtener muestra gratuita
LANDERCOLL HEC ayuda a los fabricantes de revestimientos texturados a desarrollar viscosidad y cuerpo en el recubrimiento, suspender cargas pesadas y agregados, controlar la reología durante la aplicación y mantener una consistencia estable en el envase en sistemas de textura fina, de arena, efecto piedra, relieve, rodillo y pulverización.
Respuesta rápida HEC (Hidroxietilcelulosa) es el éter de celulosa principal utilizado en recubrimientos texturados a base de agua. Funciona como un espesante de alto cuerpo y modificador reológico que aumenta la viscosidad, suspende cargas pesadas y agregados, favorece la retención de textura tras la aplicación, reduce el escurrimiento en superficies verticales y mantiene una consistencia estable en el envase durante el almacenamiento.
— HEC · Texture Coatings · Filler Suspension · Anti-Sag · Texture Retention · Rheology Control · Decorative Coatings
HEC · Texture Body
High-body thickening for aggregate suspension and texture pattern retention after placement.
Texture coatings are water-based coating materials used to create decorative surface structures, patterns, and tactile effects on interior and exterior walls and façades. Unlike standard wall paints, they are formulated to produce a visible and often tactile surface pattern — ranging from fine sand finishes and smooth stone effects to bold relief patterns and coarse aggregate textures.
Texture coatings may be applied by roller, brush, spray, trowel, or specialized texture tools depending on the desired surface appearance and application method. Typical products include fine texture coatings, sand texture coatings, stone-effect coatings, relief coatings, roller texture coatings, spray-applied texture coatings, interior decorative coatings, and exterior façade texture systems.
A typical texture coating formulation includes polymer emulsion, pigments, fillers, quartz sand, calcium carbonate, texture aggregates, water, dispersants, wetting agents, defoamers, preservatives, pH modifiers, rheology modifiers, and cellulose ether.
Cellulose ether — specifically HEC (Hydroxyethyl Cellulose) — is used as the primary water-phase thickener and rheology modifier. It builds viscosity and coating body, suspends heavy fillers and aggregates, controls rheology during application, supports texture retention after placement, reduces sagging on vertical surfaces, and maintains stable in-can consistency during storage and distribution.
Texture coatings present significantly greater formulation challenges than standard wall paints. They contain higher filler loading, coarser particles, heavier aggregates, and greater solids content — all of which increase the demand for thickening, suspension, and rheology control.
Without suitable cellulose ether, texture coatings face critical performance failures: filler and aggregate settling, texture collapse after application, sagging on vertical surfaces, and inconsistent application by roller, spray, or trowel.
LANDERCOLL HEC builds the internal structure of water-based texture coatings. It supports the suspension of fillers and aggregates while allowing the coating to flow under application force — and then recover sufficient body to hold texture and resist sagging after placement.
HEC addresses the thickening, suspension, rheology, anti-sag, and storage stability demands that distinguish texture coatings from standard architectural wall paints.
Builds viscosity and internal structure to hold texture pattern and resist collapse before drying.
Keeps heavy fillers and coarse aggregates evenly distributed throughout storage and application.
HEC (Hydroxyethyl Cellulose) is the primary LANDERCOLL cellulose ether product for texture coating applications. As a non-ionic, water-soluble cellulose ether, HEC provides broad compatibility with anionic dispersants, surfactants, and polymer emulsions used in high-solids water-based texture coating systems.
HEC · Body · Suspension · Texture Retention
HEC is widely used across fine texture coatings, sand texture coatings, stone-effect coatings, relief coatings, roller texture coatings, and spray-applied texture systems because it delivers reliable thickening, viscosity stability, filler and aggregate suspension, and application consistency in high-solids water-based coating formulations.
HEC hydrates readily in water and builds viscosity efficiently, providing consistent thickening performance even in high-PVC, high-solids formulations where suspension demands are greatest.
Texture coating formulations vary by binder type, filler loading, aggregate size, target texture pattern, application method, substrate, and climate conditions.
| Componente | Function in Texture Coatings |
|---|---|
| Emulsión de polímero | Main film-forming binder. |
| Pigments | Provide color and decorative appearance. |
| Cargas | Adjust body, opacity, texture, and cost balance. |
| Quartz Sand / Texture Aggregates | Create texture pattern and surface structure. |
| Agua | Main dispersion medium. |
| Dispersants | Help disperse pigments, fillers, and particles. |
| Wetting Agents | Improve particle wetting and surface compatibility. |
| Defoamers | Reduce foam during production and application. |
| Preservatives | Support in-can stability and microbial protection. |
| pH Modifiers | Adjust formulation pH and stability. |
| Cellulose Ether (HEC) | Improves viscosity, rheology, suspension, and texture stability. |
| Otros Aditivos | Adjust leveling, open time, water resistance, durability, or special effects. |
Fine Texture
Sand Texture
Stone-EffectRelief CoatingDifferent texture coating systems require different viscosity profiles, suspension strength, texture retention, and application rheology.
| Texture Coating Type | Recommended Product Direction | Principales Requisitos de Rendimiento |
|---|---|---|
| Fine Texture Coating | Medium viscosity HEC | Smooth texture, stable viscosity, uniform appearance. |
| Sand Texture Coating | Medium to high viscosity HEC | Sand suspension, body, anti-settling support. |
| Stone-Effect Coating | High viscosity HEC | Aggregate stability, texture retention, anti-sag. |
| Relief Texture Coating | High viscosity HEC | Strong body, shape retention, decorative texture stability. |
| Roller Texture Coating | Medium to high viscosity HEC | Roller transfer, texture control, anti-sag behavior. |
| Spray Texture Coating | Selected HEC grade | Spray consistency, suspension, stable flow. |
| Interior Texture Coating | HEC | Smooth application, filler stability, decorative finish. |
| Exterior Texture Coating | HEC | Body, anti-sag support, weather-resistant storage stability. |
HEC dosage depends on texture type, filler and aggregate loading, particle size, application method, target viscosity, and storage stability requirements.
Dosage varies with aggregate loading, particle size, and target texture pattern.
HEC supports the fresh coating properties that formulators and applicators evaluate most directly in texture coating systems.
HEC builds the viscosity and coating body needed for texture coatings to perform correctly. Texture coatings typically require higher viscosity than standard wall paints due to greater filler and aggregate loading — making effective thickening one of the most critical functions of HEC in these systems.
Heavy fillers such as calcium carbonate, quartz sand, stone particles, silica, and decorative aggregates settle rapidly without adequate suspension support. HEC increases water-phase viscosity and structural support, significantly reducing particle settling.
Texture coatings must flow under roller, spray, brush, or trowel force — but recover structural body quickly enough to hold the applied texture pattern and resist sagging before the film dries.
Suitable HEC grades improve coating body and structural recovery, reducing sagging risk even at higher film build thicknesses on vertical wall surfaces.
After application, the coating must hold its designed decorative structure until the film dries completely. HEC supports texture retention by improving viscosity, suspension, and internal structural stability of the wet coating film.
HEC helps create more consistent behavior during roller, spray, brush, or trowel application. It also maintains viscosity and particle suspension during storage, reducing hard settling, phase separation, and inconsistent application performance after extended shelf aging or temperature variation.
Many texture coating stability and application issues are related to viscosity, suspension, and rheology — areas where HEC grade and dosage selection directly affect performance.
Weak suspension, low viscosity, heavy particles.
Improve filler and aggregate suspension.
Low body, poor rheology, unsuitable thickener grade.
Support texture retention and structural recovery.
Weak coating structure, excessive water, low viscosity.
Improve body and anti-sag behavior.
Unbalanced rheology, wrong viscosity, poor particle distribution.
Support controlled application consistency.
Poor flow balance, particle settling, unsuitable viscosity.
Improve suspension and flow stability.
Poor dispersion, unstable filler system, inconsistent viscosity.
Support uniform particle distribution.
Low viscosity, poor compatibility, weak suspension system.
Improve in-can stability and suspension.
Excessive dosage or unsuitable high viscosity grade.
Adjust grade selection and dosage balance.
Understanding the variables that influence HEC behavior helps formulators make better grade selections, optimize dosage, and avoid common production and stability problems.
Different polymer emulsions — acrylic, styrene-acrylic, pure acrylic, and others — affect viscosity response, compatibility, film formation, and final coating performance.
Calcium carbonate, quartz sand, stone particles, silica, talc, and decorative aggregates each have different densities, particle sizes, and surface characteristics that influence suspension demand.
Larger and denser particles settle more rapidly and require stronger suspension support from HEC. Stone-effect and relief coatings typically require medium to high viscosity HEC grades at higher dosage levels.
High-PVC texture coating systems increase the demand for suspension stability and body control, typically requiring higher HEC dosage within the reference range.
Roller, spray, brush, and trowel application each require different viscosity and flow behavior. Spray-applied texture coatings generally require lower viscosity and better flow than trowel-applied relief coatings.
pH modifiers, dispersants, surfactants, preservatives, and defoamers may influence HEC hydration rate, viscosity development, and coating compatibility.
HEC must be properly dispersed and fully hydrated to deliver target viscosity. Pre-dispersing HEC in water before adding fillers, aggregates, and other ingredients is a common best practice.
Too little HEC may not provide sufficient suspension or texture retention. Too much HEC may make the coating difficult to apply or create excessive tool resistance during troweling.
Selección de Grado
Match HEC viscosity grade to your texture type, aggregate loading, and application method.
Choosing the right HEC grade requires balancing viscosity target, filler and aggregate suspension needs, texture retention requirements, anti-sag performance, application method, and storage stability.
What type of texture coating are you producing? (fine, sand, stone-effect, relief, roller, spray)
What target viscosity range do you need?
What filler and aggregate system is used, and at what loading level?
What particle size and density are included in the formulation?
What polymer emulsion system is used?
Is the coating for interior or exterior application?
Do you need stronger anti-sag support or better texture retention?
What application method is used: roller, spray, brush, or trowel?
What pH range and additive system are used?
What production process and hydration time are available?
LANDERCOLL can help review your texture coating formulation direction and recommend a suitable HEC grade for testing.
Solicitar soporte técnicoLANDERCOLL HEC for texture coatings is supplied in industrial packaging suitable for coating production, transportation, and storage.
LANDERCOLL provides product-related documentation to support texture coating formulation testing, purchasing review, and internal approval processes.
All documents supplied upon request to support formulation review, quality approval, and import compliance.
If your texture coating has filler or aggregate settling, texture collapse after application, sagging on vertical surfaces, rough or uneven texture pattern, poor roller transfer, spray instability, storage separation, or heavy application feel, the HEC grade or dosage may need to be reviewed.
LANDERCOLL can help evaluate suitable HEC options based on your binder system, filler and aggregate loading, particle size, target viscosity, application method, and storage stability requirement.
HEC grade selection for target viscosity and body.
Filler and aggregate suspension support.
Texture retention and anti-sag performance guidance.
Roller, spray, and trowel application consistency support.
Storage stability discussion.
Dosage reference and starting point recommendations.
Sample and quotation communication.
HEC (Hydroxyethyl Cellulose) is the most widely used cellulose ether in water-based texture coatings. It improves thickening, filler and aggregate suspension, rheology control, anti-sag behavior, texture retention, and storage stability across fine texture coatings, sand texture coatings, stone-effect coatings, relief coatings, and spray-applied texture systems.
HEC builds viscosity and coating body, suspends heavy fillers and aggregates to reduce settling, controls rheology during application, supports texture retention after placement, reduces sagging on vertical surfaces, and maintains stable in-can consistency during storage. It is a non-ionic thickener compatible with the anionic dispersants and polymer emulsions used in water-based texture coating systems.
Texture coatings contain higher filler loading, coarser particles, and heavier aggregates than standard wall paints. These heavier components require stronger viscosity and suspension support to prevent settling during storage, maintain texture pattern after application, and resist sagging on vertical surfaces.
Yes. Suitable HEC grades improve coating body and internal structural stability in the wet film, which supports better texture retention after application. However, final texture retention also depends on binder type, filler system, aggregate size, application method, and film thickness.
A common reference dosage range is 0.2%–1.3% by weight, depending on texture type, filler and aggregate loading, particle size, application method, and target viscosity. Stone-effect and relief coatings typically require 0.5%–1.3%, while fine texture and spray coatings may use 0.2%–0.8%. Final dosage must be confirmed through testing.
Yes. HEC improves coating body and structural recovery after application, which helps reduce sagging and running on vertical wall surfaces. The anti-sag effect depends on HEC grade selection, dosage level, filler loading, film thickness, and the complete formulation system.
Settling is typically caused by insufficient viscosity, weak suspension support, heavy aggregate density, poor dispersion during production, unsuitable HEC grade selection, incorrect dosage, or unbalanced formulation design. Increasing HEC dosage, selecting a higher viscosity grade, or improving the dispersion process can help reduce settling risk.
Start by defining your texture coating type, target viscosity, filler and aggregate system, particle size and density, application method, anti-sag requirement, and storage stability target. Then contact LANDERCOLL with these parameters — our technical team can recommend suitable HEC grades and provide samples for formulation evaluation.
Whether you produce fine texture coatings, sand texture coatings, stone-effect coatings, relief coatings, roller texture coatings, spray texture coatings, interior decorative coatings, or exterior façade texture systems, LANDERCOLL HEC helps you achieve better viscosity and body, reliable filler and aggregate suspension, effective anti-sag behavior, consistent texture retention, and stable storage performance.
LANDERCOLL supplies HEC cellulose ether to texture coating manufacturers and decorative coating formulators worldwide. Our products are supported by technical data sheets, safety data sheets, certificates of analysis, and application guidance.
Contact LANDERCOLL today to receive an HEC grade recommendation, request samples, or get a competitive quote for your texture coating formulation project.
