selluloosieriitti-erinomainen — Luotettu yli 1000 yritykseltä maailmanlaajuisesti Hanki ilmainen näyte
LANDERCOLL lääkelaatuinen selluloosaeetteri tukee tablettien päällystysjärjestelmiä luotettavalla kalvonmuodostuskyvyllä, vakaalla viskositeetilla, tasaisella päällysteen levityksellä, yhtenäisellä pintapeitolla ja johdonmukaisella päällysteen laadulla.
Kirkas kalvopäällyste, pigmentoitu päällyste, suojaava päällyste, värillinen päällyste ja välittömästi vapauttava päällystejärjestelmä — oikean HPMC-viskositeettiluokan ja päällystekoostumuksen valinta on perustavanlaatuista tasaisen tablettien ulkonäön ja prosessin vakauden saavuttamiseksi.
— HPMC · Hypromelloosi · Kalvopäällystys · Tabletin päällystys · Päällystyksen tasaisuus · USP · EP · JP
Kalvopäällystys
Pigmentoitu pinnoite
Pinnoitteen tasaisuus
Pinnansuojaus
Tabletin päällystysvaatimukset edellyttävät sopivia lääkelaatuisia selluloosaeetterituotteita ja asianmukaista dokumentaatiota. Kaikki selluloosaeetterilaadut eivät sovellu lääkekäyttöön.
Ennen arviointia tai kaupallista soveltamista asiakkaiden tulee vahvistaa tuotemäärittelyt, tekniset tietolomakkeet, käyttöturvallisuustiedotteet, analyysitodistukset, farmakopeaan liittyvät tiedot sekä kaikki tarvittavat sääntely- tai laatudokumentit annosmuotonsa, kohdemarkkinansa ja sisäisen pätevöintiprosessinsa mukaisesti.
HPMC · Hypromelloosi on ensisijainen kalvonmuodostuspolymeri lääkkeiden tablettipinnoitusjärjestelmissä. Se liukenee tai dispergoituu pinnoitusnesteisiin, suihkuttaa tasaisesti ja kuivuu yhtenäiseksi kalvoksi, joka parantaa tabletin ulkonäköä, tarjoaa pintasuojaa ja tukee pinnoitusprosessin vakautta. Lopullinen pinnoitussuorituskyky riippuu HPMC-viskositeettiluokasta, polymeripitoisuudesta, pehmittimen tyypistä, pigmenttijärjestelmästä, suihkutusparametreista ja koko pinnoitusformulaatiosta.
Kalvo · Yhdenmukaisuus · Pinnansuojaus
Tabletin päällystys on tärkeä prosessi kiinteiden annosmuotojen valmistuksessa. Se voi parantaa tabletin ulkonäköä, peittää epämiellyttävän maun tai hajun, tukea tabletin käsittelyä, suojata tabletin pintaa, parantaa nielemistä ja tarjota toiminnallista päällystyssuorituskykyä formulaation suunnittelusta riippuen.
LANDERCOLL tarjoaa sopivaa lääkelaatuista HPMC (hydroksipropyylimetyyliselluloosa), tunnetaan myös nimellä hypromelloosi, lääkkeellisiin tablettipinnoitusjärjestelmiin. HPMC:tä käytetään laajalti kalvonmuodostuspolymerina, koska se pystyy muodostamaan tasaisen pinnoituskalvon, kun se liuotetaan, suihkutetaan, kuivataan ja formuloidaan oikein sopivien pehmittimien, pigmenttien ja muiden pinnoitusaineiden kanssa.
Sopiva HPMC-laatu auttaa päällystysformulaatioita saavuttamaan stabiilin viskositeetin, hyvän ruiskutettavuuden, tasaisen kalvonmuodostuksen, yhtenäisen peittävyyden ja tasaisen tablettien ulkonäön. Se on erityisen hyödyllinen välittömästi vapauttavissa kalvopäällystyksissä, suojaavissa päällystyksissä, väripäällystyksissä, kosteusherkissä tablettien päällystysjärjestelmissä ja valituissa toiminnallisissa päällystyskonsepteissa.
Etsitkö lääkelaatuista HPMC:tä tablettien päällystysjärjestelmääsi varten?
Kysy tuotesuositustaTabletin päällystys vaatii polymeerin, joka liukenee tai dispergoituu kunnolla, muodostaa stabiilin päällystysliuoksen, ruiskuttaa tasaisesti, kuivuu yhtenäiseksi kalvoksi ja säilyttää sopivan kalvon lujuuden ja ulkonäön. Ilman sopivaa kalvonmuodostajapolymeeriä päällysteissä voi esiintyä huonoa peittävyyttä, epätasaista ulkonäköä, halkeilua, hilseilyä, karheutta, tarttumista, takertumista tai epäjohdonmukaista suorituskykyä eri erien välillä.
Tyypillinen tablettien päällystysjärjestelmä sisältää kalvonmuodostavan polymeerin, pehmittimiä, pigmenttejä ja toiminnallisia apuaineita — joista jokainen vaikuttaa päällysteen ulkonäköön, prosessin suorituskykyyn ja lopulliseen tabletin laatuun.
| Komponentti | Function in Tablet Coating |
|---|---|
| HPMC / Kalvonmuodostuspolymeri | Muodostaa pääkalvon. |
| Pehmennin | Parantaa kalvon joustavuutta ja vähentää haurautta |
| Pigmentit / Väriaineet | Anna tabletin väri ja tunnistetiedot. |
| Opasifioijat | Paranna läpinäkyvyyttä ja ulkonäköä |
| Tarttumisenestoaineet | Vähennä tarttumista pinnoitusprosessin aikana |
| Vesi / Liuotinjärjestelmä | Liuottaa tai hajottaa pinnoitteen ainesosia. |
| Suspending Agents | Help maintain uniform distribution of insoluble ingredients |
| pH:n säätäjät | Adjust coating system conditions where required |
| Muut toiminnalliset apuaineet | Adjust appearance, protection, release behavior, or process performance |
LANDERCOLL provides pharmaceutical-grade HPMC as the primary film-forming polymer for tablet coating, with selected CMC grades for specialized coating systems. All grade selections should be confirmed through coating trials and customer qualification.
Hypromellose for film-forming tablet coating systems
HPMC is the primary LANDERCOLL cellulose ether product for tablet coating applications. Suitable pharmaceutical-grade HPMC can be used as a film-forming polymer in coating formulations where stable viscosity, good film formation, smooth spraying, and uniform surface coverage are required. Depending on the formulation and process, HPMC may be used in clear coatings, pigmented coatings, protective coatings, color coatings, and selected functional coating systems.
Selected cellulose derivative for viscosity, suspension, and stabilization support
CMC is not usually the main film-forming polymer for standard tablet film coating, but suitable pharmaceutical-grade CMC may be used in selected systems where viscosity control, suspension stability, or stabilizing performance is required. Its use should be evaluated according to dosage form, formulation system, coating process, and required documentation.
Different tablet coating systems require different HPMC viscosity directions and formulation design strategies.
Film clarity, smooth coating, sprayability
Pigment suspension, film uniformity, stable viscosity
Surface protection, film strength, coating consistency
Uniform color, smooth appearance, pigment stability
Fast coating process, thin film formation, tablet appearance
Surface protection, film integrity, process stability
Specific performance target, process compatibility
Suspension stability, spray consistency, uniform coverage
The dosage of HPMC in tablet coating depends on coating type, solution viscosity, solids content, target film thickness, tablet core properties, spray process, and desired coating weight gain.
HPMC concentration in the coating liquid is usually selected according to viscosity, sprayability, and solids content. Coating weight gain is determined by the final dosage-form requirement. Final values should be confirmed through formulation testing, coating process trials, appearance evaluation, disintegration or dissolution testing, and customer validation.
Depends on coating solids and target film thickness
Depends on pigment loading and suspension stability
Depends on surface protection target
Depends on opacity and color uniformity requirement
Usually selected for low to moderate coating weight gain
Depends on dosage form and performance target
Depends on solids content, viscosity, and sprayability
Depends on formulation and validation requirements
HPMC helps form a continuous film on the tablet surface after spraying and drying. A good film-forming polymer supports smooth appearance, complete surface coverage, and coating integrity — the foundation of all tablet coating performance requirements.
Coating solution viscosity directly affects spraying, atomization, surface coverage, drying behavior, and process efficiency. HPMC grade and concentration should be selected to achieve a stable viscosity suitable for the specific coating equipment and process parameters being used.
Uniform coating is critical for appearance, identification, handling performance, and functional consistency. HPMC supports even film formation when properly formulated, dissolved, and processed — helping reduce batch-to-batch variation in coating quality.
A suitable HPMC coating can help protect the tablet surface from abrasion, dusting, handling damage, and selected environmental exposure depending on the complete coating system design and storage conditions.
In pigmented coating systems, all coating ingredients must remain uniformly suspended throughout the spraying process. HPMC can help support coating suspension stability and more consistent color distribution across the tablet batch.
A stable coating solution or suspension helps improve spray consistency and reduce common process issues such as nozzle blockage, uneven coverage, tablet sticking, or rough surface appearance during the coating run.
Tablet coating can significantly improve color, gloss, smoothness, branding recognition, and final product appearance. HPMC supports smooth film formation and stable coating performance that contributes to a professional, consistent tablet finish.
When tablet coating performance fails during development or production, HPMC grade, coating formulation, and process parameters are often the first variables to review.
Poor viscosity control, weak spray consistency, tablet movement issues.
Supports stable coating liquid viscosity when properly selected and hydrated.
Poor atomization, high viscosity, fast drying, pigment instability.
Helps control viscosity and film formation for smoother coating appearance.
Brittle film, poor plasticizer balance, unsuitable polymer system.
Supports film formation; plasticizer balance remains important.
Excessive tackiness, high spray rate, poor drying balance.
Supports controlled film formation when properly formulated.
Pigment settling, poor suspension, weak mixing.
Supports coating suspension stability for more consistent color distribution.
High viscosity, poor dispersion, pigment agglomeration.
Requires optimized viscosity and dispersion through grade selection.
Poor adhesion to tablet core, unsuitable coating system.
Supports film integrity; tablet core compatibility remains critical.
Poor hydration, wrong grade, unstable coating liquid.
Grade selection supports viscosity consistency throughout the coating run.
Understanding these variables helps formulators optimize HPMC grade selection, polymer concentration, and coating process parameters for target coating performance.
Different HPMC viscosity grades provide different coating solution viscosity, sprayability, film strength, and process behavior. Lower viscosity grades are typically preferred for coating applications where sprayability and thin film formation are priorities.
Higher polymer concentration may increase coating solids and film formation efficiency, but it can also increase viscosity and affect sprayability. The right balance between solids content and viscosity is critical for process performance.
Plasticizers influence film flexibility, brittleness, cracking tendency, and overall coating performance. The plasticizer must be compatible with HPMC and selected according to the coating type and regulatory requirements.
Pigments and opacifiers affect suspension stability, color uniformity, opacity, viscosity, and surface appearance. Their particle size, concentration, and dispersion quality all influence final coating results.
Water-based and hydroalcoholic systems can behave differently in terms of dissolution rate, drying speed, viscosity, and coating process conditions. Solvent choice should be aligned with regulatory requirements and equipment capability.
Core hardness, porosity, friability, shape, surface roughness, and moisture sensitivity all affect coating adhesion, film formation, and overall coating quality. The coating system must be compatible with the tablet core.
Spray rate, atomization pressure, nozzle type, inlet temperature, bed temperature, and airflow strongly affect coating uniformity and film quality. Process parameters must be optimized alongside the coating formulation.
Proper HPMC dissolution or hydration is important for stable coating viscosity and smooth spraying. Incomplete hydration can lead to lumps, viscosity variation, or spray inconsistency.
Pan coating and fluid-bed coating processes may require different coating viscosity, solids content, spray behavior, and drying balance. Equipment type and scale should be considered during formulation development.
Choosing the right HPMC requires balancing film formation, solution viscosity, sprayability, drying behavior, tablet appearance, and dosage-form requirements. Review these 10 key questions before grade selection.
What type of tablet coating are you developing (clear, pigmented, protective, color, or functional)?
What coating equipment is used (pan coater or fluid-bed coater)?
What target coating weight gain is required?
What viscosity range is suitable for the spray process?
What polymer concentration and solids content are planned?
Will pigments, opacifiers, plasticizers, or anti-tacking agents be used?
Is the coating water-based or solvent-based?
What tablet core properties must be considered?
What pharmacopoeia or documentation requirements apply?
What disintegration, dissolution, appearance, and stability targets must be achieved?
LANDERCOLL can help review your tablet coating direction and recommend suitable HPMC grade options for evaluation.
Pyydä arvosuositustaLANDERCOLL pharmaceutical-grade cellulose ether for tablet coating is supplied in packaging suitable for protected transportation, storage, and pharmaceutical production handling, depending on selected grade and customer requirement.
Because cellulose ether can absorb moisture, proper storage helps maintain powder flowability, dissolution behavior, viscosity performance, and product stability.
25 kg · Sealed · GMP
LANDERCOLL can provide product-related documents to support pharmaceutical evaluation, purchasing review, quality assessment, and internal approval processes.
| Document Type | Tarkoitus |
|---|---|
| Tekninen tietolomake | Grade specifications, viscosity, and physical properties |
| Käyttöturvallisuustiedote | Handling, storage, and safety information |
| Analyysitodistus | Batch-specific quality confirmation |
| Tuotemäärittely | Detailed grade parameters |
| Pharmaceutical Grade Statement | Where applicable |
| Pharmacopoeia-Related Information | Where applicable |
| Microbiological / Heavy Metals Data | Where applicable |
| Residual Solvent Information | Where applicable |
| Allergen / GMO / TSE-BSE Statements | Where applicable |
| Packaging & Storage Information | Packaging specs and storage requirements |
| Export Documentation | Where applicable, for import/customs purposes |
If your tablet coating system has poor film formation, unstable viscosity, rough surface, color variation, spray inconsistency, cracking, sticking, peeling, or poor coating uniformity — the HPMC grade and coating formulation may need to be reviewed.
LANDERCOLL can help evaluate suitable HPMC grade directions based on your coating type, viscosity target, solvent system, coating equipment, tablet core properties, and documentation requirements.
HPMC grade selection for tablet coating
Coating viscosity direction and solids content guidance
Film-forming performance support
Pigmented coating formulation discussion
Coating process compatibility review
Pharmaceutical documentation support
Näyte- ja tarjousviestintä
Pitkäaikaisen pätevän toimituksen keskustelu
HPMC, also known as hypromellose, is the most widely used cellulose ether in pharmaceutical tablet coating systems. It acts as the primary film-forming polymer, helping create a smooth, uniform coating layer on the tablet surface.
HPMC helps form a smooth and uniform coating film, control coating solution viscosity, support spray consistency, improve tablet appearance, and provide surface protection depending on the formulation design and coating process.
Yes. Suitable pharmaceutical-grade HPMC can be used in pigmented coating systems, where it helps support film formation, coating solution viscosity, and suspension stability of pigments and opacifiers.
Yes. Suitable low viscosity HPMC grades are commonly used in immediate-release film coating systems. Final disintegration and dissolution behavior should be confirmed through formulation testing and product validation.
HPMC coating performance is affected by viscosity grade, polymer concentration, plasticizer type and level, pigment system, solvent system, spray rate, drying conditions, coating equipment type, and tablet core properties. All of these factors should be considered together during formulation development.
The dosage depends on coating formulation design, solids content, target viscosity, coating weight gain, and process requirements. There is no universal standard — final dosage should be confirmed through coating trials and product validation.
HPMC can help improve film formation, viscosity control, and coating uniformity, but coating defects may also be caused by process conditions, plasticizer balance, tablet core quality, drying rate, spray settings, and equipment setup. A systematic approach to formulation and process optimization is recommended.
No. Tablet coating requires suitable pharmaceutical-grade HPMC with appropriate specifications, documentation, and customer qualification. Industrial or construction-grade HPMC is not appropriate for pharmaceutical use.
Lower viscosity grades are typically preferred for tablet coating because they provide better sprayability and thinner film formation. However, the optimal viscosity grade depends on the coating system, solids content, process equipment, and target performance. LANDERCOLL can help recommend suitable grade directions.
Start with coating type, target viscosity, coating process equipment, tablet core properties, solvent system, coating weight gain target, and documentation requirements. LANDERCOLL can help recommend suitable pharmaceutical-grade HPMC directions for evaluation and testing.
Whether you develop clear film coating, pigmented coating, protective coating, immediate-release coating, color coating, tai selected functional tablet coating systems — LANDERCOLL can help you choose suitable pharmaceutical-grade HPMC for better film formation, viscosity control, coating uniformity, and process stability.
Our team supports pharmaceutical manufacturers with grade recommendations, viscosity direction guidance, documentation support, sample supply, and qualified long-term supply discussion.
Pharmaceutical-Grade HPMC for Tablet Coating · Film Coating · Coating Uniformity · Surface Protection · Hypromellose · USP · EP · JP
