셀룰로오스 에테르 for 파쇄 지원

CMC and HEC are the most commonly considered cellulose ethers for fracturing support fluid applications. CMC supports viscosity adjustment, particle suspension, and fluid-loss control assistance in selected water-based systems. HEC provides non-ionic thickening with broader salt and electrolyte compatibility, making it useful in brine-based fracturing support systems. Selected specialty grades may also be considered for customized requirements.

CMC helps adjust viscosity, support particle and proppant suspension, improve fluid consistency, and assist fluid-loss control in selected compatible water-based systems. Its performance is sensitive to salinity and divalent ion concentration, so compatibility with the specific base fluid and brine system must be confirmed through testing.

HEC supports viscosity control, smooth rheology, and fluid consistency in compatible water-based and brine-based fracturing support fluids. Its non-ionic character provides broader tolerance for salts, divalent ions, and a wider range of oilfield additives compared to CMC — making it a preferred option in many brine-based and high-salinity fracturing support systems.

Cellulose ether can help improve fluid viscosity and suspension behavior, which may support proppant and sand carrying capacity in selected systems. Final carrying performance depends on particle size and density, fluid viscosity profile, flow rate, shear conditions, temperature, and the complete fluid design. Cellulose ether alone is typically used as a viscosity support additive rather than a primary crosslinked fracturing fluid polymer.

Selected cellulose ether grades — particularly HEC — may be used in brine-based fracturing support fluids, but compatibility must be confirmed through testing with the specific brine type, salt concentration, divalent ion content, temperature, and full additive package. Not all grades are suitable for high-salinity or divalent-ion-containing systems.

A common reference dosage range is approximately 0.1%–1.2% by fluid volume, depending on base fluid type, salinity, viscosity target, particle loading, temperature, and cellulose ether grade. Proppant carrying fluids and diverting support fluids typically require higher dosages. Final dosage must be confirmed through viscosity testing, suspension evaluation, and shear stability testing.

Viscosity loss during pumping may be caused by high shear rates, elevated temperature, high salinity, pH changes, divalent ion effects, premature breaker activation, additive incompatibility, insufficient polymer concentration, or an unsuitable grade for the specific fluid conditions. Grade selection should include shear stability and thermal aging evaluation under representative conditions.

Start by defining the base fluid type, salinity, temperature range, particle loading, viscosity target, pumpability requirement, breaker chemistry, additive package, formation compatibility needs, and field operation requirements. LANDERCOLL can recommend suitable CMC, HEC, or selected cellulose ether grades for your specific fracturing support fluid system and arrange samples for laboratory evaluation.