High-performance cellulose ether engineered for water retention, open time, anti-sag behavior, workability, and consistent mortar performance in cement-based and gypsum-based building material systems.
LANDERCOLL HEMC / MHEC is a water-soluble, non-ionic cellulose ether designed for drymix construction material manufacturers who need reliable, repeatable performance in tile adhesive, wall putty, skim coat, cement plaster, gypsum plaster, EIFS / ETICS mortar, masonry mortar, waterproof mortar, and repair mortar systems.
In cement-based and gypsum-based formulations, HEMC / MHEC delivers measurable improvements in water retention, open time, anti-sag behavior, troweling feel, spreading smoothness, and application consistency — making it one of the most widely used functional additives in the global drymix mortar industry.
LANDERCOLL HEMC / MHEC is a construction-focused cellulose ether product engineered for manufacturers who need reliable water retention, workability improvement, open time extension, anti-sag behavior, and consistent mortar performance across a wide range of drymix building material systems.
As a non-ionic, water-soluble cellulose ether, HEMC / MHEC is especially well-suited for cement-based and gypsum-based formulations. It influences how mortar mixes with water, how smoothly it spreads and trowels, how long it remains workable, how well it resists sagging on vertical surfaces, and how consistently it performs from batch to batch on the job site.
Different drymix products require different HEMC / MHEC grades. The right selection depends on viscosity level, water retention target, open time requirement, anti-slip performance, formulation design, and application method.
HEMC / MHEC is particularly established in tile adhesive, tile grout, wall putty, skim coat, cement render, cement plaster, gypsum plaster, masonry mortar, EIFS / ETICS mortar, waterproof mortar, repair mortar, and ready-mix dry mortar systems.
HEMC stands for Hydroxyethyl Methyl Cellulose. MHEC stands for Methyl Hydroxyethyl Cellulose. Both names refer to the same product family (CAS 9032-42-2). HEMC / MHEC is produced by chemically modifying purified natural cellulose — typically derived from wood pulp or cotton linter — through a controlled alkaline reaction with methyl chloride and ethylene oxide.
Influence solubility, thermal behavior, and surface activity of the cellulose ether in mortar systems.
Influence water retention capacity, viscosity development, and compatibility within mortar systems.
The ratio and degree of these two substitutions determine the grade's performance profile. Viscosity — typically measured at 2% aqueous solution — is the primary parameter for grade selection, ranging from below 5,000 mPa·s to above 200,000 mPa·s.
Although used at relatively low dosage levels — typically 0.1%–0.5% of the dry mix weight — HEMC / MHEC has a strong influence on mortar performance, affecting water retention, rheology, open time, and anti-sag behavior simultaneously.
Both are non-ionic methyl cellulose ethers used in construction materials, but they differ in their secondary substitution group. HPMC uses hydroxypropyl groups (–OCH₂CHOHCH₃), while HEMC / MHEC uses hydroxyethyl groups (–OCH₂CH₂OH). This structural difference affects water retention behavior, dissolution profile, and performance characteristics in specific mortar systems. In many European and international drymix construction markets, HEMC / MHEC is particularly established for tile adhesive, plaster, and EIFS / ETICS applications.
Despite dosage levels of only 0.1%–0.5%, HEMC / MHEC delivers measurable improvements across water retention, open time, anti-sag behavior, workability, and surface finish — making it one of the highest-value functional ingredients in drymix mortar formulation.
The following table provides a general technical reference for Hydroxyethyl Methyl Cellulose. Exact values vary by product grade, viscosity level, substitution type, particle size, surface treatment, and testing method. This information is intended as a formulation reference starting point, not a final product specification.
| Article | Référence typique |
|---|---|
| Nom du produit | Hydroxyéthyl Méthyl Cellulose / Méthyl Hydroxyéthyl Cellulose |
| Abréviation | HEMC / MHEC |
| Numéro CAS | 9032-42-2 |
| Apparence | Poudre blanche à blanc cassé |
| Type ionique | Non ionique |
| Base moléculaire | Éther de cellulose (cellulose naturelle modifiée) |
| Source de matière première | Pulpe de bois ou coton linters |
| Solubilité | Soluble in cold water; forms a viscous, pseudoplastic solution |
| Gélification thermique | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| Gamme de viscosité | Plusieurs grades : faible / moyenne / haute / très haute viscosité |
| Mesure de la viscosité | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| Traitement de surface | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| Stabilité du pH | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| Compatibilité ionique | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| Fonctions clés | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| Type d'application principal | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| Documents disponibles | TDS, SDS, COA, recommandations de produit disponibles sur demande |
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Delayed hydration — better dispersion, reduced lumping, controlled dissolution in drymix systems during mixing and storage.
Faster hydration — quick viscosity development, suitable for fast-dissolving and selected direct-hydration formulations.
Note: Viscosity ranges listed above are approximate references. Actual LANDERCOLL HEMC / MHEC grades should be selected according to your formulation, testing method, application environment, and required documentation. Contact our team for specific grade recommendations.
HEMC / MHEC is a multifunctional cellulose ether. In most drymix mortar applications, it contributes several performance benefits simultaneously. Below is a structured overview of its primary functions across different construction system types.
HEMC / MHEC forms a polymer network within the mortar matrix that physically restricts water migration into the substrate. This ensures sufficient water remains available for complete cement hydration or gypsum setting — supporting stronger bond development, better surface quality, and longer working time. Higher viscosity grades and higher dosage levels generally provide stronger water retention.
HEMC / MHEC makes mortar smoother, more cohesive, and easier to spread, trowel, scrape, and finish. Tile adhesive spreads more evenly with less effort. Wall putty scrapes more smoothly with fewer drag marks. Plaster and render spread more consistently across large surfaces. Finishing coats level more easily and produce better surface quality.
HEMC / MHEC extends open time by maintaining moisture within the mortar layer and slowing the rate of water loss to the substrate and to evaporation. This is critical in tile adhesive and wall putty, where insufficient open time forces installers to work in smaller sections — increasing labor time and the risk of poor bond formation. Especially important for large-format tile installation.
HEMC / MHEC builds mortar body and provides a pseudoplastic rheology profile. The mortar flows and spreads under tool pressure during application, but recovers its structure and resists movement once the tool is removed — essential for reliable vertical surface installation in wall tile adhesive, EIFS / ETICS, and repair mortar.
HEMC / MHEC solutions are pseudoplastic (shear-thinning): viscosity decreases under shear during mixing and application, and recovers at rest. In self-leveling compounds, it contributes to controlled flow without excessive separation. In machine-applied plaster, it helps maintain consistent pump pressure and spray behavior.
HEMC / MHEC improves homogeneity and batch-to-batch consistency, reducing variability between batches, operators, and environmental conditions. In wall putty, skim coat, gypsum plaster, and finishing mortar, it contributes to improved scraping behavior, leveling, and final surface quality ready for painting or decoration.
HEMC / MHEC grade selection should always begin with the target application. Different construction products require different balances of water retention, viscosity, open time, anti-sag behavior, smoothness, and surface finish quality. The table below provides a structured reference for common application-to-grade matching.
| Application | Orientation recommandée par grade | Exigences principales de performance |
|---|---|---|
| Adhésif pour carrelage | High to extra-high viscosity | Water retention, open time, anti-slip, troweling feel |
| Coulis de carrelage | Viscosité moyenne | Smooth filling, water retention, workability |
| Mastic mural / Enduit de finition | Viscosité moyenne à élevée | Smooth scraping, water retention, surface finish |
| Enduit de ciment / plâtre | Viscosité moyenne à élevée | Workability, spreadability, water retention |
| Plâtre | Viscosité moyenne | Smooth application, water management, consistency |
| Mortier de maçonnerie | Viscosité moyenne | Board life, workability, water retention |
| Composés autonivelants | Viscosité faible à moyenne | Controlled flow, stability, water retention |
| Mortier ITE / ETICS | Haute viscosité | Open time, anti-sag, adhesion-related support |
| Mortier étanche | Viscosité moyenne à élevée | Workability, uniform coating, stable consistency |
| Mortier de réparation | Viscosité moyenne à élevée | Anti-sag, water retention, controlled finishing |
| Mortier d'isolation | Haute viscosité | Anti-sag, open time, adhesion support |
| Mortier prêt à l'emploi en poudre | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
| Application | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
|---|---|
| Adhésif pour carrelage | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| Coulis de carrelage | 0,1% – 0,3% |
| Mastic mural / Enduit de finition | 0,2% – 0,5% |
| Enduit de ciment / plâtre | 0,15% – 0,4% |
| Plâtre | 0,1% – 0,3% |
| Mortier de maçonnerie | 0,1% – 0,3% |
| Composés autonivelants | 0,05% – 0,2% |
| Mortier ITE / ETICS | 0,2% – 0,5% |
| Mortier étanche | 0,15% – 0,4% |
| Mortier de réparation | 0,15% – 0,4% |
| Mortier d'isolation | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| Mortier prêt à l'emploi en poudre | Dépend du type de produit et de l'objectif de performance |
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
01
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
HEMC / MHEC helps improve water retention, smooth filling behavior, application control, and grout consistency. It supports a more uniform grout structure during joint filling and makes the grout easier to finish and clean from tile surfaces. Medium viscosity grades are typically used.
HEMC / MHEC improves scraping smoothness by lubricating the mortar during tool contact, reduces drag and surface marks, retains water to prevent rapid drying and surface cracking, supports consistent spreading behavior across large wall areas, and helps maintain stable product texture throughout the working session.
HEMC / MHEC improves water retention, board life, workability, and application consistency in masonry mortar for brick and block laying. Board life — the period during which mixed mortar remains usable — is an important practical performance parameter, directly affecting labor productivity on the job site.
Plaster · iv.
05
Controlled water retention, smooth spreading behavior, and stable workability — for both manual and machine application.
Cement Render & Plaster — HEMC / MHEC improves mortar handling during both manual and machine application. It helps the render spread more evenly, reduces surface tearing, maintains workable consistency throughout the session, supports better surface finishing, and contributes to consistent pump behavior and spray pattern stability in machine-applied systems.
Gypsum Plaster — HEMC / MHEC helps improve water retention and workability in gypsum plaster without excessively retarding the setting process. Because gypsum systems are sensitive to set time, HEMC / MHEC grade and dosage selection must be carefully tested.
Used across all system layers to improve open time, anti-sag behavior, stable consistency, and application reliability. In adhesive mortar, extends open time for accurate insulation board placement. In base coat, provides anti-sag and smooth mesh embedding. In finishing coat, supports smooth application and surface quality.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Designed for cement plaster and gypsum plaster systems where smooth spreading, consistent water retention, and controlled application behavior are required — for both manual and machine application.
Designed for insulation system mortars requiring good open time, stable consistency, anti-sag performance, and reliable application behavior across adhesive, base coat, and finishing coat layers.
Designed for self-leveling compounds where controlled flow, water retention, and system stability must be carefully balanced. Low to medium viscosity grades used at carefully controlled dosage levels.
Designed for repair mortar systems where workability, sag resistance, water retention, and controlled surface finishing are important — particularly for vertical and overhead repair applications.
Cellulose ethers are a family of water-soluble polymers, each with distinct chemical structures and performance profiles. The table below helps formulators understand the key differences and select the most appropriate product. LANDERCOLL supplies HEMC / MHEC, HPMC, HEC, and CMC.
Strong construction performance: water retention, open time, anti-sag, workability in drymix mortar.
Tile adhesive · Wall putty · Plaster · EIFS / ETICS · Masonry mortar · Drymix systemsVersatile across multiple industries: water retention, thickening, film forming, broad compatibility.
Construction · Pharma · Food · Personal care · Detergents · IndustrialExcellent rheology control in aqueous and latex systems, strong latex compatibility.
Water-based paints · Coatings · Cleaners · Personal careÉpaississement, liant, stabilisation, contrôle de la texture ; économique dans de nombreux systèmes.
Alimentaire · Détergents · Céramique · Pharma · Pétrole · PapierBoth are non-ionic methyl cellulose ethers used in drymix construction materials and can deliver similar core functions. The choice depends on specific performance targets, regional market preferences, formulation system, raw material compatibility, and cost considerations. In many European and international drymix construction markets, HEMC / MHEC is particularly established for tile adhesive, plaster, and EIFS / ETICS. HPMC is more widely used across a broader range of industries. Neither product is universally superior — the right choice should be determined by formulation testing in your specific system.
Both HEMC / MHEC and HPMC are non-ionic methyl cellulose ethers, but they differ in their secondary substitution group: HPMC uses hydroxypropyl groups (–OCH₂CHOHCH₃) while HEMC / MHEC uses hydroxyethyl groups (–OCH₂CH₂OH). This structural difference affects water retention behavior, dissolution profile, and performance characteristics in specific mortar systems — making grade selection and formulation testing essential for determining the optimal product for your application.
LANDERCOLL HEMC / MHEC is supplied in industrial packaging suitable for transportation, storage, and production handling. Cellulose ether powders are hygroscopic — proper storage conditions help maintain powder flowability, dissolution performance, and application effectiveness throughout product shelf life.
Emballage Standard
Recommandations de stockage
LANDERCOLL peut fournir une documentation liée au produit pour soutenir l'évaluation de la formulation, la revue des achats, la communication technique, la soumission réglementaire et les processus d'approbation internes.
Documents disponibles
To help our team recommend the most suitable HEMC / MHEC grade for your application, please include as much of the following information as possible when contacting us. A detailed inquiry allows us to provide a more accurate grade recommendation and support your evaluation more efficiently.
Product application (e.g., tile adhesive, wall putty, gypsum plaster, EIFS mortar) and formulation system type (cement-based, gypsum-based, or mixed system).
Current HEMC / MHEC or HPMC grade reference, if available. Main performance target — e.g., open time, water retention, anti-sag, surface finish. Application method: manual troweling, scraping, machine spraying, or pouring.
Current formulation challenge or performance gap, if applicable. Testing method or standard used, if applicable. Required quantity — sample, trial, or commercial volume.
Destination country or target market. Documentation requirements — TDS, SDS, COA, compliance documents. Timeline for evaluation or sourcing decision.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Beyond the HEMC / MHEC grade and dosage, performance in drymix mortar is significantly affected by cement type and quality, filler system (sand, calcium carbonate, talc), gypsum quality, ambient temperature, water quality, redispersible polymer powder content, starch ether addition, aggregate particle size, and application method. These factors should all be considered when conducting formulation testing and grade selection.
LANDERCOLL HEMC / MHEC is designed specifically for drymix mortar, tile adhesive, wall putty, plaster, and related building material applications. Our product development and technical support are focused on the practical performance requirements of construction material manufacturers.
We help customers select HEMC / MHEC grades based on real performance requirements — water retention level, viscosity, open time, anti-sag behavior, surface finish, and application method — rather than simply providing a product list.
LANDERCOLL HEMC / MHEC supports tile adhesive, tile grout, wall putty, skim coat, cement render, gypsum plaster, masonry mortar, EIFS / ETICS mortar, waterproof mortar, repair mortar, and ready-mix dry mortar systems.
Nous fournissons des FDS, FDS, COA, documents de recommandation de grade et guides d'application pour soutenir votre évaluation de formulation, votre revue d'achat et vos processus d'approbation interne.
Notre objectif est de soutenir les clients depuis la première demande de produit jusqu'aux tests de formulation, aux décisions d'approvisionnement et à la coopération d'approvisionnement à long terme — avec une qualité de produit constante et une communication réactive.
LANDERCOLL HEMC / MHEC supports manufacturers of tile adhesive, wall putty, skim coat, cement plaster, gypsum plaster, EIFS / ETICS mortar, masonry mortar, waterproof mortar, repair mortar, and ready-mix dry mortar systems. Whether you are developing a new drymix formulation, optimizing an existing product, or evaluating a new cellulose ether supplier, our team can help you identify the most suitable grade.
