Celluloseether-Exzellenz — Vertraut von über 1000 Unternehmen weltweit Kostenloses Muster erhalten
LANDERCOLL HEC cellulose ether helps latex paint manufacturers improve thickening efficiency, viscosity control, pigment and filler suspension, application feel, leveling performance, and in-can stability across economy, standard, premium, interior, exterior, matt, satin, and high-PVC grades.
From economy interior latex to premium exterior coatings and high-PVC architectural systems — the right HEC grade delivers dependable water-phase thickening, stable rheology, and predictable application performance.
Interior · Exterior · Economy · Premium · Matt · Satin · High-PVC
Latex paint is the dominant coating format for residential, commercial, and institutional building surfaces worldwide. As a water-based system built around polymer emulsion binders, it offers low VOC content, easy cleanup, and broad substrate compatibility — but these advantages only translate into a marketable product when the formulation delivers reliable in-can stability, smooth application performance, and consistent coating appearance.
Unlike associative thickeners, LANDERCOLL HEC is a non-ionic, water-soluble polymer that thickens the water phase directly — a robust, predictable solution for latex paint formulators across economy, standard, premium, interior, exterior, matt, satin, and high-PVC grades.
For latex paint manufacturers, this means better thickening efficiency, stronger pigment suspension, and more reliable in-can stability. For applicators and end users, it means smoother brush and roller application, reduced spatter, cleaner coverage, and a more uniform surface after drying.
Within a latex paint formulation, HEC operates in the continuous water phase — building viscosity, providing structural body, supporting pigment and filler suspension, and controlling the flow behavior that determines how the paint feels under a brush or roller. HEC dissolves cleanly in water, builds stable viscosity efficiently at low dosage levels, and is compatible with acrylic, vinyl-acrylic, styrene-acrylic, and PVA emulsion binders.
Without suitable thickening and rheology control, latex paint fails at the most basic performance requirements — both in the container and during application. HEC helps latex paint manufacturers address these challenges across economy through premium formulation grades.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Latex paint formulations vary by binder type, pigment volume concentration (PVC), quality level, application area, and target performance. The table below provides a general reference for common formulation components and the role HEC plays within the system.
| Komponente | Function in Latex Paint |
|---|---|
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | Main film-forming binder; provides adhesion, durability, and film integrity |
| Titanium Dioxide | Provides whiteness, hiding power, and opacity |
| Colored Pigments | Provide decorative color and tinting |
| Fillers (CaCO₃, Kaolin, Talc) | Adjust opacity, texture, body, and cost balance |
| Wasser | Main dispersion medium for the water-based system |
| Dispersants | Help disperse and stabilize pigments and fillers |
| Entschäumer | Reduce foam during production and application |
| Konservierungsmittel | Support in-can microbial stability and shelf life |
| pH Modifiers | Adjust formulation pH for stability and compatibility |
| HEC (Cellulose Ether) | Controls viscosity, rheology, suspension, leveling, and application stability |
| Coalescing Agents | Support film formation at lower temperatures |
| Wetting Agents | Improve substrate wetting and surface coverage |
| Associative Thickeners | May be used alongside HEC to optimize ICI viscosity and leveling in premium systems |
| Sonstige Zusatzstoffe | Adjust open time, durability, or special surface properties |
| Latex Paint Type | Empfohlenes Produkt | Main Requirements |
|---|---|---|
| Economy Latex Paint | Mittlere Viskosität HEC | Basic thickening, suspension, stable application |
| Standard Latex Paint | Mittlere Viskosität HEC | Viscosity control, brushability, roller application |
| Premium Latex Paint | Selected HEC grade | Smooth application, stable viscosity, uniform finish |
| Interior Latex Paint | HEC | Pigment suspension, leveling, storage stability |
| Exterior Latex Paint | HEC | Anti-sag support, coating consistency, filler stability |
| Matt Latex Paint | HEC | Smooth rolling, pigment stability, surface uniformity |
| Satin Latex Paint | Selected HEC | Flow control, leveling, smooth appearance |
| High-PVC Latex Paint | Mittlere bis hohe Viskosität HEC | Filler suspension, body, anti-settling support |
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | Typische Referenzdosierung |
|---|---|
| Economy Latex Paint | 0,2% – 0,5% |
| Standard Latex Paint | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| Premium Latex Paint | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| Interior Latex Paint | 0,2% – 0,7% |
| Exterior Latex Paint | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| Matt Latex Paint | 0,2% – 0,7% |
| Satin Latex Paint | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| High-PVC Latex Paint | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
When latex paint performance fails in production or application, the HEC grade, hydration, or dosage is often the first variable to review within the complete formulation system.
Insufficient HEC dosage, poor hydration, unsuitable grade.
Improve viscosity build and paint body.
Weak suspension, low viscosity, high-density fillers.
Support pigment and filler suspension stability.
Low viscosity, poor rheology balance, unsuitable formulation.
Support controlled application behavior during rolling.
Weak structural body, excessive water, low thickener efficiency.
Improve anti-sag body and structural viscosity.
Unbalanced rheology, wrong viscosity, incompatible additives.
Improve flow behavior and leveling balance.
Poor suspension system, low viscosity, incompatible additives.
Improve formulation stability and in-can consistency.
Poor filler dispersion, unbalanced rheology, wrong HEC grade.
Support smoother and more comfortable application.
Poor hydration, pH drift, surfactant or preservative incompatibility.
Improve viscosity stability through grade selection.
Understanding the variables that influence HEC behavior in latex paint systems helps formulators make better selection decisions and avoid common performance problems in production and storage.
Different emulsion systems — pure acrylic, vinyl-acrylic, styrene-acrylic, PVA — affect viscosity development, compatibility, film formation, and application behavior. HEC grade selection should be evaluated against the specific emulsion used, as some emulsion types may affect HEC viscosity efficiency.
TiO₂, CaCO₃, kaolin, talc, and colored pigments vary in particle size, density, and surface chemistry. Higher filler loadings require stronger suspension support. The specific surface area and surface treatment of titanium dioxide can also affect HEC viscosity response.
High-PVC latex paint systems — particularly economy and standard grades with high filler loadings — require stronger body and suspension control. Higher viscosity HEC grades or higher dosages may be needed.
Most HEC grades perform well across a broad pH range (pH 2–12), but the timing of pH adjustment during production can affect HEC hydration and viscosity development. Alkaline pH modifiers should typically be added after HEC has fully hydrated.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Grade Selection Guide
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
What pH range does the formulation operate at?
What dispersants, surfactants, and preservatives are included?
What mixing equipment and hydration time are available?
What batch size and production process are used?
What shelf-life period and temperature range are required?
Supporting latex paint development with complete technical documentation.
— LANDERCOLL R&D —LANDERCOLL provides product-related documentation to support latex paint formulation testing, purchasing review, quality approval, and import compliance requirements.
All documents supplied upon request to support your formulation review, quality approval, and import compliance process.
HEC grade selection for latex paint formulations
Thickening efficiency and rheology profile optimization
Pigment and filler suspension improvement
Brushability, roller application, and spatter reduction support
Leveling, anti-sag, and storage stability discussion
HEC vs. associative thickener system guidance
Dosage reference and adjustment guidance
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
If your latex paint is experiencing low viscosity, pigment settling, excessive roller spatter, sagging on vertical walls, poor leveling, storage separation, or inconsistent batch performance — the HEC grade or dosage may need to be reviewed.
LANDERCOLL provides technical support to help latex paint manufacturers evaluate HEC options based on binder system, pigment and filler loading, target viscosity, PVC level, application method, and storage stability requirements.
HEC (Hydroxyethyl Cellulose) is the most widely used cellulose ether in water-based latex paint. It improves thickening, viscosity control, pigment and filler suspension, rheology, brush and roller application feel, leveling, anti-sag behavior, and storage stability across interior and exterior latex paint grades.
HEC builds viscosity in the water phase of latex paint, stabilizes pigments and fillers against settling, improves brush and roller application feel, supports leveling, provides anti-sag body on vertical surfaces, and helps maintain consistent paint stability during storage and transport.
Thickening gives latex paint body and structural stability. Without adequate thickening, latex paint may be too thin to control during application, allow pigments and fillers to settle during storage, produce excessive roller spatter, sag on vertical walls, and deliver inconsistent coverage and coating appearance.
Yes. HEC increases the structural viscosity of the water phase, which helps keep pigments and fillers — including dense materials like titanium dioxide and calcium carbonate — evenly distributed during storage and reduces hard settling that is difficult to redisperse.
A common reference dosage range is 0.2%–1.0% by weight, depending on paint grade, target viscosity, pigment and filler loading, and formulation design. Economy grades typically use 0.2%–0.5%, while high-PVC systems may use up to 0.4%–1.0%. Final dosage must be confirmed through testing.
HEC is a non-ionic, water-soluble polymer that thickens the continuous water phase directly, providing robust low-shear and medium-shear viscosity with broad formulation compatibility. Associative thickeners interact with the emulsion polymer and provide stronger high-shear (ICI) viscosity and leveling improvement, but are more sensitive to surfactant concentration. Many premium latex paint formulations use both HEC and associative thickeners.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
English English 
العربية
Deutsch
Українська
Ελληνικά
Español
Español de Perú
Français
Magyar
Bahasa Indonesia
Italiano
Português
Türkçe
Русский
Nederlands
Slovenčina
Svenska
Български
Čeština
Dansk
Eesti
Suomi
日本語
한국어
Lietuvių kalba
Latviešu valoda
Norsk bokmål
Polski
Português do Brasil
Română
Slovenščina
